-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Book Excerpt: 'The Printed Circuit Designer's Guide to... Designing for Reality,' Chapter 2
January 4, 2024 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
This is an excerpt from Sunstone Circuit's book: The Printed Circuit Designer's Guide to... Designing for Reality by Matt Stevenson
Chapter 2: Variations in the Manufacturing Process
Once a CAD tool is chosen and the basics understood, the thought process should then shift toward the manufacturing of the PCB, before applying electrons to the screen. Let’s get the “bad news” out of the way first. Perfection is an unattainable goal. Don’t expect manufacturing to be perfect. There will always be variations from optimum at every step of every manufacturing process. Designers should recognize that variation and physical challenges within the PCB manufacturing process can be exacerbated by their design decisions. Not to worry, this is easily overcome with forethought during design and a good manufacturing partner.
According to the law of variation as defined in the Statistical Quality Control Handbook, 2nd Edition (January 1982):
- Everything varies. In other words, no two things are exactly alike.
- Groups of things from a constant system of causes tend to be predictable. If outcomes from systems can be predicted, then it follows that they can be anticipated and managed.
In a recent post for bizfluent, Beth Robinson identified the five main sources of process variation: raw materials, equipment, human actions, environment, and method.
Raw Materials
There will be variation in the output of all manufacturing processes and all suppliers.
The materials required in a manufacturing process come most often in either the form of a manufactured material or ore. These suppliers of manufactured material will experience variation during their production process, so there will inevitably be slight inconsistencies in the materials they supply. This can have a cascading effect, creating variations during PCB production and potentially impacting board performance. Raw materials like copper don’t always come from the same source, especially during times when supply chains are compromised (Figure 2.1). Manufacturers and designers may need to consider variations in purity and how they will affect the manufacturing outcome. There are specifications for most of these materials (copper cladding, laminate, etc.) that limit the variation to an agreed upon, acceptable range.
Continue reading the rest of this book at I-007eBooks.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/10/2024 | Marcy LaRont, PCB007 MagazineSpring is a renewal each year as dormant flora bloom, and baby ducklings and geese are ever present in local bodies of water. Even though it is beginning to get hot, I love this time of year in Arizona, with the sun waking me around 5 a.m. It fills me with an energy that I often lose in the dark winter months. Wherever you find yourself in the world, I hope you are enjoying Spring and that you are filled with energy and enthusiasm for all the great work part of our daily lives in this industry.
ViTrox Presents Next-Gen Intelligent Manufacturing Solutions at SEMICON Southeast Asia 2024
05/10/2024 | ViTroxViTrox, which aims to be the world’s most trusted technology company, is pleased to announce its participation as an exhibitor and Platinum sponsor at SEMICON Southeast Asia 2024! Join us from May 28-30 at Booth #1504 in Malaysia International Trade and Exhibition Centre (MITEC), KL, to experience our advancement in technology and manufacturing.
Podcast Review: On the Line with… Designing for Reality
05/09/2024 | Duane Benson, Positive Edge LLCAs a technologist, if I were forced to come up with just one recurring theme that I might call a professional “nemesis,” it would be the difference between theory and reality. A lot of technology we have at our disposal works well in theory but falls short when reality hits. That’s not the only reason I chose to listen to and review On the Line with… Designing for Reality, featuring a series of conversations with ASC Sunstone’s Matt Stevenson, but it certainly helped that the title caught my eye.
NEOTech Positions Itself as Microelectronics Industry Leader with High-Technology Investments
05/09/2024 | NEOTechNEOTech, a leading provider of electronic manufacturing services (EMS), design engineering, and supply chain solutions in the high-tech industrial, medical device, and aerospace/defense markets, announces a significant investment in acquiring new Palomar 8100 wire bonder machines, enhancing the company’s positioning as a leader of cutting-edge microelectronics assemblies for mission-critical applications.
MKS’ Atotech, ESI to Participate in CPCA Show
05/09/2024 | MKS’ AtotechMKS’ Atotech, and ESI will participate in the CPCA Show 2024. The show will be held from May 13 to 15, 2024, at the National Exhibition and Convention Center (Shanghai) and will bring together domestic and international manufacturers in the electronic circuit industry.